Technical Info
SASS videos showing installaiton of short stroke kits, action springs, and more for those interested in cowboy competition.
*Technical Information*
Videos
Printable PDF Technical Instructions and Information
Stoeger Light Weight Spring Installation Instructions
Short Stroke Kit Installation Instructions
Click here to download
Important: You must tune or replace the existing lever & lifter springs before installing the short stroke kit! The lever cam must be tuned as well. Call or email us with any questions.
Coil Mainspring Conversion Installation Instructions for Model 73 Rifles
Click here to download
Coil Mainspring Conversion Installation Instructions for Model 66 Rifles
Click here to download
Keeper modification for *new style light weight firing pin extension
Click here to download
Lightening Uberti springs for model 66, 73, and Henry rifles
Click here to download
Model 66 & 73 frame modification to improve feeding of the first round
Click here to download
Action Springs Installation Instructions
Click here to download
Installing a Butt Cover (See below for picture guide!)
Marlin Firing Pin Instructions
Tips & Recommendations for proper use and function of Pioneer Gun Works Rifles!
SpiXprings Lever Springs Installation Instructions
SliXprings Main Hammer Spring Installation Instructions
HOW TO MEASURE FOR CUSTOM LEATHER BUTT COVERS:
Please follow these steps to measure for the stock cover:
1. Measure the circumference of the base of the stock.
2. Four inches down from the base, measure the circumference again.
3. Six inches down from the base, measure the circumference again.
4. Trace around the base of the stock.
5. Measure the widest point of the width from both the top and bottom, as well as from side to side.
6. Along with these measurements, please provide a description of the stock, including the model of the firearm and the profile of the butt plate area (e.g., curved, flat, pad type).
7. Let us know if you have any color preferences.
8. Inform us if you would like the leather to be rough end out (standard for grip) or smooth at the butt end.
9. If possible, please send us a picture along with your request to: willshootem@pioneergunworks.com.
10. Double check those measurements! Yep.. that’s 4 7/8” not 5 7/8”!!
Lacing Up a Butt Cover (step-by-step picture guide):
Other Troubleshooting Suggestions:
The Dreaded Marlin Jam http://marauder.homestead.com/files/marlin94fix.html .
Also using a 1.48 Tapered Flat Point bullet has been recommended for Marlins. Questions? Give us a call!