Installation Instructions & Technical Info.

P.G.W. Short Stroke Kit Installation Video.

Download Instructions Here!

P.G.W. Action Springs Installation video.

Download Instructions Here!

P.G.W. Speed Sight Installation Video.

P.G.W. Stock Brass Carrier Modification for use with our Short Stroke Kits. 

Downloadable Installation instructions.

Short Stroke Kit Installation

Action Springs Installation

PGW Tips & Care

Coil Mainspring Installation 1866

Coil Mainspring Installation 1873

PGW Light Duty Steoger Trigger Spring Installation

Frame Modification for 1866/73 (Round Alignment Fix)

Leaf Spring Tuning DIY Instructions

Leather Butt Stock Cover Installation

Marlin One Peice Firing Pin Installation

Firing Pin Extension "Keeper" Modification

SliXprings Lifter/Lever Spring Installation

SliXprings Hammer Spring Installation

Step-By-Step Butt Stock Cover Measurement Guide.

1. Measure the circumference of the base of the stock.
2. Four inches down from the base, measure the circumference again.
3. Six inches down from the base, measure the circumference again.
4. Trace around the base of the stock.
5. Measure the widest point of the width from both the top and bottom, as well as from side to side.
6. Along with these measurements, please provide a description of the stock, including the model of the firearm and the profile of the butt plate area (e.g., curved, flat, pad type).
7. Let us know if you have any color preferences.
8. Inform us if you would like the leather to be rough end out (standard for grip) or smooth at the butt end.
9. If possible, please send us a picture along with your request to: willshootem@pioneergunworks.com.

10. Double check those measurements! Yep.. that’s 4 7/8” not 5 7/8”!!

Butt Stock Cover Lacing Picture Tutorial. 

(Pics are displayed in order of process, and is the same for Lever Wraps)